The swivel is designed to retain a rotating drilling and other tool hanging with simultaneous supply of the operational fluid from the pump to the pipe string under drilling and oilfield enterprise conditions. Swivel installation place is on the tackle system hook.

VE-100R1 Tubing swivel

VE-100R1 Tubing swivel produced by RosNefteGazInstrument is a heavy loaded structure, withholding the rotating drilling tool with simultaneous admission of the flush fluid to the tubing string in well drilling.

The swivel is designed to retain a rotating drilling and other tool hanging with simultaneous supply of the operational fluid from the pump to the pipe string under drilling and oilfield enterprise conditions. Swivel installation place is on the tackle system hook.

Parameter name VE-100R1
Cargo capacity kN (tf) 1000 (100)
Maximum load on the stem, kN (tf) 620 (62)
Working pressure, PSI (atm) 3086 (210)
Stem maximum rotations, s-1 3,33
Operating ambient temperature, °К (°С) from 233(-40) to 343(+70)
Coupling dimensions:  
1) At the feedline thread NUE-3½″ API Spec 5B TBG (Tubing non-upset)
2) On the stem under the adapter sub thread DP Ø 127 Left GOST 631-75
3) On adapter sub under the string thread NC 31 API 7
thread NC 38 API 7
thread 4 ½ FH API 7
thread NC 50 API 7
4) At feedline under the measure while drilling tubing thread ø 60 LH API Spec 5B TBG (Tubing non-upset)
Dimensions, max.: 73”×23”×22”
Weight, lbs (kg), max. 926 (420)
Technical characteristics VE-50R1 VE-60R1 VE-80R1 VE-100R1 VE-125R1
Cargo capacity kN (tf) 500 (50) 600 (60) 800 (80) 1000 (100) 1250 (125)
Working pressure, PSI (atm) 3086 (210) 3086 (210) 3086 (210) 3086 (210) 3086 (210)
Stem maximum rotations, s -1 3,33 3,33 3,33 3,33 3,33
Stem feedthrough hole diameter 2.5″/ 64 mm 2.5″/ 64 mm 3″/ 75 mm 3″/ 75 mm 3″/ 75 mm
admission 2.5″/ 64 mm 2.5″/ 64 mm 3″/ 75 mm 3″/ 75 mm 3″/ 75 mm
adapter sub D1 ( Table1) D1 ( Table1) D1 ( Table1) D1 ( Table1) D1 ( Table1)
Dimensions
Housing dimensions
67”×17”×18”
67”×17”×11”
67”×17”×18”
67”×17”×11”
72”×20”×20”
72”×20”×14”
73”×23”×22”
73”×23”×16”
73”×23”×22”
73”×23”×16”
Coupling thread coupling thread as per GOST 631-75 DP-102 Left DP-102 Left DP-114 Left DP-127 Left DP-127 Left
on the adapter sub - tool-joint thread as per API 7* d ( Table1) d ( Table1) d ( Table1) d ( Table1) d ( Table1)
of the side feedline as per API Spec 5B TBG (Tubing non-upset) NUE-27/8 NUE-27/8 NUE-3½″ NUE-3½″ NUE-3½″
at the feedline under the measure while drilling as per API Spec 5B TBG (Tubing non-upset) NUE-23/8 NUE-23/8 NUE-23/8 NUE-23/8 NUE-23/8
Operating ambient temperature, °К (°С) from 233(-40) to 343(+70) from 233(-40) to 343(+70) from 233(-40) to 343(+70) from 233(-40) to 343(+70) from 233(-40) to 343(+70)
Weight, lbs (kg), max. 485 (220) 485 (220) 750 (340) 926 (420) 926 (420)

* Upon customer’s request, the thread handedness can be right-handed.

Table No. 1 Main technical specifications of stem adapter subs
Adapter sub Tool-joint thread d API 7 D1
VE-100R1.00.29 NC 26 1 2/5"/ 36 mm
VE-100R1.00.27 2 7/8 Reg 1 4/5"/ 45 mm
VE-100R1.00.28 NC 31 2 1/8"/ 54 mm
VE-100R1.00.30 3 ½ Reg 2 1/8"/ 54 mm
VE-100R1.00.26 NC 38 2 1/8"/ 54 mm
VE-100R1.00.31 NC 40 2 1/8"/ 54 mm
VE-100R1.00.25 4 ½ FH 3"/ 75 mm
VE-100R1.00.09 NC 50 3 1/8"/ 80 mm
VE-100R1.00.33 5 ½ FH 3 1/8"/ 80 mm

Feedline subs (fig. 2), adapter sub under QRC2” (fig. 3) and adapter sub from QRC2 (fig. 4) may be delivered at consumer's request.

The scheme of

Hover to zoom

Figure 1
The scheme of

Hover to zoom

Figure 2
The scheme of

Hover to zoom

Figure 3



Table No. 2 Main technical specifications of Tubing adapter subs to the feedline

Adapter sub L D1 Thread d2 Fig.
N NUE-3½″ х N NUE-3½″ 10"/ 252 mm 2"/ 50 mm NUE-3 1/2″ 1
N NUE-3½″ х N NUE-27/8 8 3/8"/ 212 mm 2"/ 50 mm NUE-2 7/8″ 1
N NUE-3½″ х N NUE-23/8 8 3/8"/ 212 mm 2"/ 50 mm NUE-2 3/8″ 1
N NUE-3½″ х N QRC2" 11 1/5"/ 285 mm 2"/ 50 mm - 2
N NUE-3½″ with QRC2" 11 1/5"/ 285 mm 2"/ 50 mm NUE-2 3/8″ 3

Swivel package includes:

  1. Tubing swivel - 1 pcs.
  2. Set of spare parts kit*:
    • Nozzle VE-100R1.01.01 - 1 pcs.
    • Pump bucket VE-100R1.01.06 - 4 pcs.
    • Ring 095-105-58-2-3 GOST 18829-73 - 2 pcs.
  3. Operating instruction – 1 pcs

* Upon consumer's request, it is possible to deliver an additional or extended set of spare parts kit.

Complete list of spare parts kits supplied optionally, according to Table 1.

ЗИП

Hover to zoom

Figure 1
Table No. 1 Complete list of spare parts kits supplied optionally.
Item No. Labeling Name Note
1 VE-100R1.01.00 Top seal Assembled
1.1 VE-100R1.01.01 Nozzle  
1.2 VE-100R1.01.02 Vessel  
1.3 VE-100R1.01.03 Closing sleeve  
1.4 VE-100R1.01.04 Pressing ring  
1.5 VE-100R1.01.05 Support ring  
1.6 VE-100R1.01.06 Crevron ring  
1.7 VE-100R1.01.07 Nut  
1.8 VE-100R1.01.07-01  
2 VE-100R1.02.00 Lower seal Assembled
2.1 VE-100R1.02.01 Ring  
2.2 VE-100R1.02.02 Plug  
2.3   Pump bucket 1.1-150х180-2GOST 8752-79  
3 VE-100R1.03.00 Stem Thread BT 127 Left
 
5 VE-100R1.00.21 Safety ring  
6 VE-100R1.00.01 Body  
7 VE-100R1.00.02 Pedestal  
8 VE-100R1.00.03 Cover  
9 VE-100R1.00.04 Bail  
10 VE-100R1.00.05 Feedline  
11 VE-100R1.00.18 Stopper  
12 VE-100R1.00.07 Holder  
13 VE-100R1.00.08 Finger  
14 VE-100R1.00.09
VE-100R1.00.09-01
VE-100R1.00.09-02
Adapter sub Thread Z-86 Left
Thread Z-102 Left
Thread Z-121 Left
15 VE-100R1.00.10 Axe-holder  
16   Stopper М22х1,5  
17 VE-100R1.00.12 Gasket  
18   Ring 095-105-58-2-3 GOST 9833-73/18829-73  
19   Ring 310-320-58-2-3 GOST 9833-73/18829-73  
20   Pump bucket 1.1-150х180-2  
21 VE-100R1.00.18 Pump bucket  
22   Pump bucket 1.1-220х250-2  
23   Nut 2М135х2.6.05 GOST 11871-88  
 
25   Bearing 1000928 GOST 8338-75  
26   Bearing 9039434 GOST 9942-80  
27   Bearing 2007934 GOST 27365-87  
QUICK-RELEASE CONNECTION

Using the quick-release connection technology for the top seal (sealing gland) speeds up the overhaul and gland (coupling) change process.

SPHERICAL BEARING USE

Spherical bearing creates lesser material resistance under flow pressure. As a consequence, the swivel does not run hot and the tear wear decreases.

SUBSTITUTION SWIVEL

We have provided the possibility for out clients to get one supplementary swivel, which can be uses in case of repair works, decreasing equipment downtime.

SPARE PARTS KIT AS A SET

Supply package includes a basic spare parts kit, it can be enlarged optionally that would allow eliminating potential failures quickly with no downtime.

USING POLYURETHANE SEALING GLANDS

Replacing the rubber sealing glands with polypropylene is driven by the greater polyurethane resistance to abrasive and weather impact. On average, their lifetime is 3-5 times as much as the rubber equivalent. Polyurethane sealing glands are more resistant to loose medium adhesion (which is important in drilling) and more durable to incision occurrence and spreading.

4-LAYERED CORROSION-RESISTANT COATING

At the cover baseline is a zinc-based epoxy primer (comparable to hot dip galvanization by its anticorrosive properties). Then three layers of decorative anticorrosive paint are applied at an interval of three layers.

In terms of design, the swivel can be complemented with the following:

USHV Bail extension stem

USHV Bail extension stem

Required for:

Increasing the bail length of ВБ swivel, when placed in the jaw of the lubricator bail of the measure while drilling.
In operation, a set couple of stems is mounted in the swivel housing instead of swivel ends, and the swivel bile ends are connected to the stem with fingers.

RB-R1 Drill hoses

RB-R1 Drill hoses

Required for:

Rubber drilling hoses, used on drilling units as flexible pipes for feeding water, cement and clay slurries containing up to 20% oil under high pressure (up to 35 MPa). Drill hoses may be used as major pipelines and in drilling equipment production.
A drill hose consists of an internal oil-and-petrol resistant and an external abrasion-proof rubber layers and the bearing frame made of brass plated metal cord with intermediate rubber-fabric layers.

Choose typical sizes